Search
Close this search box.

Winter Sale

Priority Tire is having a winter sale for their tires! Prepare for winter before it is too late.

Click the banner below!

Winter Tire Sale @PriorityTire | $15 OFF orders of $150+, $20 off on winter tires (Code: WNTR23)

What is the Best Cold Air Intake For Camaro v6?

Table of Contents

One of the most defining features of the Camaro V6 is its thrilling performance and it’s a complete waste if you’re not getting the most of it.

If you’re looking for a quick and simple way of enhancing its performance then the best modification to make would be adding a cold air intake.

We’ve done the hard work and research for you and compiled 5 best cold air intakes for Camaro V6 that we feel would be a great fit.

They boost airflow to your engine’s consumption chamber, enhancing your V6 to be more aerated due to less restrictive airflow.

They are fairly affordable and are one of the simplest engine modifications to install.

As a side benefit, your car’s fuel efficiency will also be enhanced.

Let’s get to it.

Bear in mind that some of the links in this post are affiliate links and if you go through them to make a purchase we will earn a commission.


Best Cold Air Intake For Camaro v6

1. K&N 69-4520TP

Sale
K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 13HP: Compatible with 3.6L, V6, 2010-2011 Chevy Camaro, 69-4520TP
  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 13HP and up to 11 ft.lbs. of Torque
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API

K&N is an industry leader when it comes to the production of cold air intakes and the 69-4520TP only goes to show how much detail goes into these filters.

They are famous for their 10 years or 1 million mile warranty and if that doesn’t convince you of their product’s durability then few things will.

One of the things that makes this cold air intake stand out is that it enhances better towing.

This means that if you’re driving uphill, you can easily accelerate due to enhanced throttle response.

The 69-4520TP also improves the sound of your engine and turns it into a beast under your hood.

The installation process is fairly easy and takes anywhere between an hour and 90 minutes.

You’ll need basic tools such as a flat blade screwdriver, wrench, extension, and Allen wrench.

If you’re unsure of how to install it, you can easily find resources online including an installation PDF.

This cold air intake is also easy to maintain and you won’t have to clean out the bug cotton gauze filters for 100,000 miles! (this is highly dependent on how well you take care of your car).

It provides your engine with world-class protection by ensuring it’s not corrupted by harmful contaminants.

The K&N 69-4520TP cold air intake has been dyno tested to ensure that your horsepower and acceleration speed increase without having to tune the electronic control unit (ECU).

It also replaces factory intake tubes & air filters and facilitates 50% more airflow.

Think of it as a custom heat shield for your Camaro v6 that protects it from high engine temperatures.

Other features include:

  • It doesn’t void your car’s warranty.
  • It’s designed to increase torque.
  • The filter is made from oiled cotton while the intake tube is moulded from mandrel-bent aluminum.

This cold air intake can fit a 2010-2011 Chevy Camaro.

Pros

  • It’s highly durable and made in the USA.
  • The manufacturers have vast industry experience.
  • ECU tuning is not required as you accelerate uphill.
  • It increases your horsepower by about 15HP.
  • It enhances fuel efficiency.
  • 10-year/Million-Mile Warranty
  • Provides 50% more airflow than restrictive factory cold air intakes.

Cons

  • When you shift gears you may experience a whistling sound.
  • It’s not compliant with CARB regulations.
  • There have been complaints about the quality of the heat shield.

2. Cold Air Inductions 501-1036-10-B

Cold Air Inductions Elite Series Aluminum Cold Air Intake Kit For 2010-2011 Chevy Camaro with 3.6L V6
  • ✔️ BETTER ENGINE PERFORMANCE: Elite Series Cold Air Intake Kits remove air restrictions and reduce intake temperatures, helping your engine make more power.
  • ✔️ FITMENT: Designed to fit the 2010-2011 Chevrolet Camaro 3.6L V6
  • ✔️ EASY DIY INSTALL: Hassle-free 100% bolt-on installation. No modifications, no drilling, and no expensive engine tuning required.
  • ✔️ 100% MADE IN THE USA: Kits are made from powder-coated thermally insulated aluminum, with stainless steel hardware and all premium components.
  • ✔️ LET YOUR ENGINE BREATHE: Dyno tested for optimal performance, each Cold Air Inductions intake improves engine power. Your engine will sound better too.

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API

The cold air induction 501-1036-10-B has been designed to enhance your engine’s performance by maintaining a steady stream of cool air.

This cold air intake can fit a 2010-2011 Chevy Camaro and is what put Cold Air Induction’s products on the map.

It’s the true definition of exceptional real-world performance and makes your rear wheels more powerful.

If you’re looking for a cold air intake that’s as good as it looks then the 501-1036-10-B is the perfect option.

This model turns your hood into a raging beast and can increase your horsepower by up to 16 HP. You don’t even have to tune the ECU as you accelerate.

Some of the features of the intake system include:

  • Stainless clamps / a black silicone coupler.
  • An airbox insulated with high-quality aluminum.
  • A high-performance air filter.
  • An intake tube that’s ceramic and thermal coated to keep your engine from overheating.
  • An airbox lid that comes with a clear inspection window so that you can check the filter out with ease.

This cold air intake also comes with a set of clear instructions so that you can install it without difficulty.

The good news is that no modifications are required because this model is a direct replacement for the OEM airbox.

This means that you’ll retain the washer bottle in its original location, reducing the time spent installing it. 

Cold Air Inductions provides lifetime warranty to all their products, which goes to show the craftsmanship that goes into their production.

The warranty is however voided if the damage is caused by misuse or modification of the cold air intake.

The air filters are also not covered if the damage is caused by wear and tear not unless the problem is caused by a material defect of workmanship.

This manufacturer offers free delivery in the United States but the 501-1036-10-B is not for sale or use in California.

Pros

  • Easy to install as it comes with a set of instructions.
  • It gives your engine a deep, beasty rumble.
  • Enhances fuel efficiency.
  • Free delivery around the USA.
  • Few modifications required when installing it.
  • Clear inspection window on airbox lid.

Cons

  • It’s not compliant with CARB regulations.
  • It’s only compatible with 2010-2011 Chevy Camaros.

3. Spectre Performance SPE-9981

Sale
Spectre Performance Air Intake Kit: High Performance, Desgined to Increase Horsepower and Torque: Fits 2012-2015 CHEVROLET (Camaro) SPE-9981
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API

Spectre cold air intake systems are famous for increasing your torque & horsepower and preventing harmful debris from destroying your engine.

Their defining feature is the washable air filter that increases your engine’s airflow by auto 50% and the Spectre Performance SPE-9981 model is as good as it gets.

DIY installations are pretty easy and only take around 90 minutes with basic tools.

This is of the source made possible by the installation instruction sheet that comes with this product.

The SPE-9981 has been dyno tested and delivers more airflow than standard factory box air filters.

It also increases the throttle response making it possible for you to accelerate uphill.

If engine sound is one of your priorities then you can’t go wrong with this model; it’s loud but not so much as to become a nuisance.

With this cold air intake, once you press the gas pedal, you unleash the full power of the Camaro v6 as is evidenced by the growling under the hood.

This cold air filter is designed for torque and horsepower increment and the tubes are polished and made from high-quality aluminum, which gives it a nice finish.

It has a 2-piece heat shield that’s powder-coated and prevents hot air from getting to the engine.

The SPE-9981 has provisions in the PCV line, vent hose, and MAF sensor, that can be mounted on the intake tube.

Its filter is also oiled and doesn’t require cleaning for up to 100,000 miles and the best part is that this cold air intake doesn’t void your vehicle’s warranty.

It can fit a 2012-2015 Chevrolet Camaros.

Pros

  • Easy to install.
  • Has just the right amount of engine sounds.
  • It’s one of the most affordable cold air filters on the market.
  • Increases engine airflow by up to 50%.
  • Filter doesn’t have to be cleaned for up to 100,000 miles.

Cons

  • The clamps are of low quality.
  • There have been complaints that it doesn’t fit the 2013 Chevy Camaro.
  • The tubes are too short and sometimes don’t fit securely.

4. K&N 69-4523TP

Sale
K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 16HP: Compatible with 3.6L, V6, 2012-2015 Chevy Camaro, 69-4523TP
  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 16HP and up to 12 ft.lbs. of Torque
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API

The Chevy Camaro by all means looks like a sports car.

It has an iconic feel, the steering wheel grip is impressive and when you sit on the driver’s seat, you all but want to drive it around the hood for everyone to see your ride.

That’s until you start it and press on the throttle; this illusion quickly dissipates, once you realize that it sounds a bit wimpy.

There’s a huge disparity between how it looks and how it sounds.

Let’s face it; a sports car is largely defined by what it has under the hood; the loud beastly growl that alerts everyone of your presence.

Without any modifications, the Camaro v6 has 30 MPG and a323 horsepower which is pretty unimpressive.

The good news is that this problem can easily be solved by the K&N 69-4523TP cold air filter.

It has a 10 year/ 1 million mile warranty that’s guaranteed to protect your vehicle for its lifetime.

This cold air intake is also dyno tested and is guaranteed to increase your airflow by up to 50% and enhance horsepower.

It also increases throttle response.

Installing it takes at most an hour and can be done with basic tools.

The 69-4523TP doesn’t void your car warranty and the air filter only needs to be cleaned after you hit the 100,000 miles mark under standard driving conditions.

It’s made with a large cotton air filter that’s washable and an intake tube made with aluminum for durability.

The filtration system is state of the art and protects your engine from damage by microscopic particles.

Ensure you have the clamps lined up for easy screwing once you have the cold air intake installed.

When you finish the installation process, take your car for a test run and experience the satisfying roar that the camaro v6 lacks.

This product can be used on 2012-2015 Chevy Camaros.

Pros

  • It’s CARB compliant.
  • Enhances your vehicle’s fuel efficiency.
  • Increase your throttle response and horsepower by 15HP.
  • It’s durable and made in the USA.
  • Has an extensive warranty and requires low maintenance.
  • Easy installation with basic hand tools.

Cons

  • You may have to modify some parts.
  • There have been complaints of the instruction manual being difficult to read.

5. K&N 69-4535TP

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 21HP: Compatible with 3.6L, V6, 2016-2019 Chevy Camaro, 69-4535TP
  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 21HP and up to 12 ft.lbs. of Torque
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API

K&N is known for high-performance air filters and is one of the top brands that produce quality cold air intakes.

Like most of their other models, the K&N 69-4535TP is guaranteed to increase your torque and horsepower and has a 10 year/ 1 million mile warranty.

It’s also easy to install, doesn’t void your car’s warranty, and is illegal to sell or use in California.

This cold air intake is engineered to deliver exceptional filtration and provide your engines with 50% more airflow than standard factory models.

The intake tube is made of durable aluminum tubes and the large, oiled conical air filter is made of cotton.

This filter protects your engine from contamination and doesn’t require cleaning for up to 100,000 miles.

It’s also washable and reusable.

The K&N 69-4535TP can be used on 2016-2019 Chevy Camaros and definitely brings your engine to life.

Pros

  • Easy to install with basic hand tools. It only takes 60-90 minutes.
  • It revs up your engine sound.
  • Has an intensive warranty.
  • You don’t have to tune your ECU as you accelerate.
  • It’s easy to maintain and is dyno tested.

Cons

  • There have been complaints of the oil filter damaging the MAF sensor.
  • It’s not CARB compliant.

What’s the Best Cold Air Intake for a Camaro v6?

If we were to choose one, the K&N 69-4523TP is the best cold air intake for a Camaro v6.

The manufacturers are famous for producing high-quality products and this product does not disappoint.

It brings your car engine to life, is fuel-efficient, and is the only cold air filter on the list that is CARB compliant.

The Chevy Camaro looks like a sports car but doesn’t sound like one and this product provides you a quick fix to the problem.

It’s also easy to install, is low maintenance, and has the flagship warranty that comes with all K&N models.

The only major downside is that you may have to modify some parts but that’s a small price to pay.

Sale
K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 16HP: Compatible with 3.6L, V6, 2012-2015 Chevy Camaro, 69-4523TP
  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine and giving an estimated increase up to 16HP and up to 12 ft.lbs. of Torque
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway driving conditions
  • DURABLE ALUMINUM INTAKE TUBE & CUSTOM HEAT SHIELD: For a more custom look under the hood, a mandrel-bent and mirror finish aluminum intake tube helps increase the volume of airflow to your engine, while the heat shield helps protect intake air from the high temperature of your engine bay

Last update on 2024-06-20 / Affiliate links / Images from Amazon Product Advertising API


How Much Horsepower Does a Cold Air Intake Add to a V6 Camaro?

Best Cold Air Intake For Camaro v6

Owning a car is not enough if the overall performance is wanting.

You could add turbos or superchargers but this will cost you lots of money and the installation process takes a long time.

This is why most Camaro v6 owners prefer air filters.

They are an economical modification and enhance your car’s efficiency.

Part of this includes increasing its horsepower by ensuring your engine is supplied with cold air.

Hot air prevents the fuel from burning efficiently due to decreased oxygen combustion, reducing your car’s horsepower.

This is where cold air intakes come into play; they increase horsepower by around 5-12HP.


Final Thoughts

The Chevy Camaro v6 is a great car that’s mostly let down by one factor; its sound.

For a car that looks that good, the engine should sound great as well.

If you’re thinking of modifying your car’s cold air intake then the above 5 products are a great place to start!


Disclaimer

Bear in mind that some of the links in this post are affiliate links and if you go through them to make a purchase we will earn a commission.

Keep in mind that I link these companies and their products because of their quality and not because of the commission we receive from your purchases.

The decision is yours, and whether or not you decide to buy something is completely up to you.

Our Best Deal Yet

Our favorite tire site is having a massive clearance sale.

If you’re looking for tires, here’s your best chance to snag a deal.